A common question asked by racers is what radios should I buy for my race car? We talk to Shawn Sampson of Sampson Racing Communications to get the low down on what racers need and why you should go digital.
A step by step guide for replacing the upper ball joints on the Spec Racer Ford. The ball joints are a maintenance item that is not often required except after a few seasons.
Kanga Motorsports is ecstatic to announce that we are upgrading the #77 Spec Racer Ford to a Generation 3.
In the words of Adam Jabaay "Spec Racer Fords are tiny, hard to see, and fast little buggers. The thing that strikes me most about them is the incredibly close competition between most of the pack, every race, everywhere."
The stress of racing puts a lot of load on the wheel bearings especially with the new stickier tires. To change out a wheel bearing you need a press.
A quick and simple modification the alternator adjuster can make it easier to tighten the alternator belt.
Rubbing is racing... but sometimes you get nudged, bumped or slammed. Luckily the rub rail is designed to be replaced.
Changing the air filter is very simple requiring no tools, just a simple rag and possibly some degreaser. Most people change it just before qualifying or if it is soaked in oil due to engine blow by
The season finale at Thunderhill was a short but great racing weekend. A few small issues with the car but ended up having two fun races dicing with the front runners in Spec Racer Ford.
Kanga Motorsports is pleased to announce our new partner ButlerBuilt of Concord, North Carolina. ButlerBuilt Professional Seat Systems offer the highest quality seating solutions for all types of racing.
Sloppy shifts? Can't find the right gear? Shifter wiggle? It might be time to replace the U-joints and/or rod ends in the shifter linkage.
Dang that don't look right? A tweaked ball joint or ball joint bracket is straight forward to replace with a few simple tools.
Kanga Motorsports is pleased to announce our new partnership with Rod End Supply Co. of Olathe, Kansas. Rod End Supply is the new official supplier of rod ends for Kanga Motorsports.